All systems operational
-->

Configure a mobile Wi-Fi hotspot to connect to the Internet using GigSky

Refer to the documentation for your device for generic configuration instructions:

  • Connect to the router’s Wi-Fi network using your computer, tablet or smartphone. Note: The default Service Set IDentifier (SSID) and wireless network encryption key should be indicated on your hotspot. NOTE: iOS devices (iPhone, iPad or iPod Touch) have a feature called Auto-Login which is enabled by default, and can cause your iOS device to be disconnected from the hotspot’s Wi-Fi network. To turn Auto-Login off:
    • On your iOS device, go to Settings / Wi-Fi.
    • Find the hotspot’s Wi-Fi network name in the list of networks, and tap the (i) to the right of the name.
    • Turn off the Auto-Login setting.
  • Connect to the router's admin interface. For example, open http://192.168.1.1 in your web browser. The url for your device may be different.
  • Click the “Log In” link: e.g. Username - admin, Password - admin. Username and password for your device may be different.
  • Verify that the Profile (APN) setting is set to "gigsky" (without quotation marks). You will have to create a new profile if one doesn't already exist for GigSky:
    • APN - Static
    • APN name - gigsky
    • Leave the User name and Password fields blank.
  • Verify the Network Settings:
    • Auto select network
    • Auto connect to network
    • Data roaming enabled
  • Reboot the device
  • Verify that the device is connected to the Internet using the admin interface.
Was this article helpful?
0 out of 0 found this helpful
Powered by Zendesk